Products

Club Car Adjustable Front Cradle Mount Replacement Adjustable Front Cradle Mount for 1984-2014 Club Car    No hardware included

Having belt slippage issues with your 97+ clockwise-rotation Big Blocked Club Car? This may be your solution! The factory driven spring doesn't pro...

Club Car Precedent Shift Linkage Bracket Also required for DS carts with dash mounted shifters. When doing an engine swap on a Club Car Precedent o...

 Club Car Secondary Clutch Tuning Spring for Big Blocked Carts (1992-1996) -Yellow **Included with 670 Club Car Kits ordered after 3/1/23** 100% M...

Club Car Starter Gen Belt for GX390 Clone Kits

Club Car Starter/Gen Bracket for Predator 13hp DOES NOT FIT OUR 13hp or 15.8hp Installation Kits! A new bracket is being developed for that purpose...

When doing a Big Block Engine installation on a 84-91 Club Car, there is a good chance that you will have clearance issues with the Throttle Box. E...

Our Engine Hold Downs allow you to adjust your belt tension and front to back engine positioning much easier than using carriage bolts. These bille...

Exhaust Gasket OEM Exhaust Gasket on our GX440 Clones Also fits GX340, GX390 & GX420 Clones

Replacement exhaust muffler for Predator 420cc Club Car (1984-1996 DS)   Includes : Exhaust (Material is Raw Uncoated Steel) Muffler Relocation Tu...

For those looking to piece together a Predator 420/459 kit in a EZGO TXT.   Includes: -Muffler (Material is Raw Uncoated Steel) -Mount bracket -Fle...

For those looking to piece together a Predator 420/459 kit in a Yamaha G2/G9/G14.   Includes: -Muffler (Material is Raw Uncoated Steel) -Mount brac...

Extended Shift Cables (F&R) for Lifted 1995-2001 EZGO TXT & Medalist The OEM EZGO Shift Cables are very tight on lifted carts between the m...

Extended Throttle Cable for 84-91 Club Car DS The OEM throttle cable on 84-91 Club Car DSs with the 341cc flathead engine is much too short (12”) t...

EZGO Adjustable Front Cradle Mount Replacement Adjustable Front Cradle Mount for EZGO TXT & Workhorses   No hardware included

EZGO Bare Replacement Cradle No Hardware or Front Mounts Included NOT COMPATIBLE WITH EZGO MPT MODELS

EZGO Big Block GX390/Clone Motor Mount Our Motor Plate setup is FULLY ADJUSTABLE for belt tension and side-side clutch adjustment. This mount is kn...

EZGO Big Block V-Twin Conversion Cradle & Motor Mount Our Conversion Cradle and Motor Plate setup is FULLY ADJUSTABLE for belt tension and side...

EZGO Marathon (1991-1993) Big Block Conversion Motor Mount - GX390/GX420/GX440/GX459 Clone Our big block conversion motor mount is fully adjustable...

E-Z-Go RXV 09+ and TXT 10+ with Kawasaki Motor, Exact Replacement, with Rollers. OEM: 618685, 644300; 50465

Female RH Heim

Flex Pipe for 420/459 cc Install Kits. 12” of 1.25” Flex Pipe No Clamps or other hardware included!

Fuel Filter with 1/4" Hose Connections

3ft of Clear Fuel Line